Laminated alumina/zirconia ceramic composites prepared by electrophoretic deposition

The electrophoretic deposition of alumina and zirconia powders from isopropanolic suspension in the presence of monochloroacetic acid was studied in the constant-current regime. The different levels of electric current during deposition from 250 μA to 48 mA were used. The green density of the deposit depends on the current density and then on the particle velocity during deposition, reaching values from 58% to 61% according to the electric current used. It was found that the lower the green density of the green deposit, the larger the pores. The low green density led to low final fired density and subsequently to the low Vickers hardness HV5 ranging from 2000 to 1650 depending on electric current used. Based on these findings microlaminates having various thickness ratios to achieve different residual stress levels were prepared consisting of alternating layers of alumina and zirconia.     

Erythropoietin Modulates Autophagy Signaling in the Developing Rat Brain in an In Vivo Model of Oxygen-Toxicity

Autophagy is a self-degradative process that involves turnover and recycling of cytoplasmic components in healthy and diseased tissue. Autophagy has been shown to be protective at the early stages of programmed cell death but it can also promote apoptosis under certain conditions. Earlier we demonstrated that oxygen contributes to the pathogenesis of neonatal brain damage, which can be ameliorated by intervention with recombinant human erythropoietin (rhEpo). Extrinsic- and intrinsic apoptotic pathways are involved in oxygen induced neurotoxicity but the role of autophagy in this model is unclear. We analyzed the expression of autophagy activity markers in the immature rodent brain after exposure to elevated oxygen concentrations. We observed a hyperoxia-exposure dependent regulation of autophagy-related gene (Atg) proteins Atg3, 5, 12, Beclin-1, microtubule-associated protein 1 light chain 3 (LC3), LC3A-II, and LC3B-II which are all key autophagy activity proteins. Interestingly, a single injection with rhEpo at the onset of hyperoxia counteracted these oxygen-mediated effects. Our results indicate that rhEpo generates its protective effect by modifying the key autophagy activity proteins.     

Biohydrometallurgical/UV production of ferrous sulphate heptahydrate crystals from pyrite present in coal tailings

The objective of this work was to develop a biohydrometallurgical/UV radiation route to produce ferrous sulphate heptahydrate (melanterite) from the pyrite present in coal tailings. The experimental work was carried out with a pyrite concentrate obtained from gravimetric processing of coal tailing. At laboratory scale it was performed the oxidation of pyrite in an aqueous medium in packed bed leaching columns in an oxidising environment with the presence of acidophilic bacteria (Acidithiobacillus ferrooxidans). The recirculation of the liquor allowed obtaining an iron-rich extract. The conversion of Fe³⁺ to Fe²⁺ was performed using ultraviolet irradiation (UV). Finally, the solution was evaporated allowing the formation of iron sulphate crystals. The results demonstrated that it is possible to produce high purity ferrous sulphate heptahydrate crystals using coal tailings as raw material.     

RF-MEMS load sensors with enhanced Q-factor and sensitivity in a suspended architecture

In this paper, we present and demonstrate RF-MEMS load sensors designed and fabricated in a suspended architecture that increases their quality-factor (Q-factor), accompanied with an increased resonance frequency shift under load. The suspended architecture is obtained by removing silicon under the sensor. We compare two sensors that consist of 195 μm × 195 μm resonators, where all of the resonator features are of equal dimensions, but one’s substrate is partially removed (suspended architecture) and the other’s is not (planar architecture). The single suspended device has a resonance of 15.18 GHz with 102.06 Q-factor whereas the single planar device has the resonance at 15.01 GHz and an associated Q-factor of 93.81. For the single planar device, we measured a resonance frequency shift of 430 MHz with 3920 N of applied load, while we achieved a 780 MHz frequency shift in the single suspended device. In the planar triplet configuration (with three devices placed side by side on the same chip, with the two outmost ones serving as the receiver and the transmitter), we observed a 220 MHz frequency shift with 3920 N of applied load while we obtained a 340 MHz frequency shift in the suspended triplet device with 3920 N load applied. Thus, the single planar device exhibited a sensitivity level of 0.1097 MHz/N while the single suspended device led to an improved sensitivity of 0.1990 MHz/N. Similarly, with the planar triplet device having a sensitivity of 0.0561 MHz/N, the suspended triplet device yielded an enhanced sensitivity of 0.0867 MHz/N.     

Inverse microemulsion copolymerization of butyl acrylate and acrylamide: kinetics,colloidal parameters and some model applications

The inverse microemulsion copolymerization of acrylamide and butyl acrylate initiated by ammonium peroxodisulphate, a water‐soluble initiator, and stabilized by anionic emulsifiers sodium bis‐2‐ethylhexylsulfosuccinate and sodium dodecylsulphate (SDS) has been studied. An increase of SDS concentration was observed to increase both the rate of polymerization and the particle size. The average number of radicals per particle (n?) is much below 0.5, which indicates desorption of monomeric radicals from polymer particles. The exit (desorption) rate constants k′_des (cm² s^?1) and k_des (s^?1) were evaluated as a function of SDS concentration (or the particle size) according to the Ugelstad/O'Toole (I), Nomura (II) and Gilbert (III) models. The value of k_des (s^?1) decreases with increasing particle size (or SDS concentration) for all three (I, II and III) models. A complex trend appears for k′_des (cm² s^?1): the Ugelstad/O'Toole model estimates a decrease, the Nomura model finds no variation and the Gilbert model estimates even a slight increase in k′_des with increasing SDS concentration. Copyright © 2006 Society of Chemical Industry     

Preparation and characterization of poly(vinyl alcohol)‐poly(vinyl pyrrolidone) blend: A biomaterial with latent medical applications

Aqueous solutions of poly(vinyl alcohol) and poly(vinyl pyrrolidone) are blended and films are produced by casting method with the further intention of being used as bio‐materials with latent medical application. Glutaraldehyde, 4,4′‐diazido‐2,2′‐stilbenedisulfonic acid disodium salt tetra‐hydrate are used as crosslinker agents, whereas lactic acid is the plasticizer in the blend. The obtained films are characterized by differential scanning calorimetry (DSC), mechanical properties, swelling and solubility behavior. DSC measurements show that the blends exhibit a single glass transition temperature indicating that they are miscible, even in the presence of the plasticizer and crosslinker agents. By the combination of all mentioned additives, a relevant enhancement of the swelling is observed, accompanied by a stabilization of the solubility during the tested time. Finally, mechanical properties show an appropriate performance in the studied parameters. As a consequence, the obtained films could be suitable for use as medium or long‐term implants. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Coupling of cell fate selection model enhances DNA damage response and may underlie BE phenomenon

Double‐strand break‐induced (DSB) cells send signal that induces DSBs in neighbour cells, resulting in the interaction among cells sharing the same medium. Since p53 network gives oscillatory response to DSBs, such interaction among cells could be modelled as an excitatory coupling of p53 network oscillators. This study proposes a plausible coupling model of three‐mode two‐dimensional oscillators, which models the p53‐mediated cell fate selection in globally coupled DSB‐induced cells. The coupled model consists of ATM and Wip1 proteins as variables. The coupling mechanism is realised through ATM variable via a mean‐field modelling the bystander signal in the intercellular medium. Investigation of the model reveals that the coupling generates more sensitive DNA damage response by affecting cell fate selection. Additionally, the authors search for the cause‐effect relationship between coupled p53 network oscillators and bystander effect (BE) endpoints. For this, they search for the possible values of uncertain parameters that may replicate BE experiments’ results. At certain parametric regions, there is a correlation between the outcomes of cell fate and endpoints of BE, suggesting that the intercellular coupling of p53 network may manifest itself as the form of observed BEs.Inspec keywords: biological effects of ionising particles, molecular biophysics, biochemistry, DNA, cellular biophysics, physiological models, biomolecular effects of radiation, cellular effects of radiation, biological effects of X‐rays, oscillations, proteinsOther keywords: three‐mode two‐dimensional oscillators, p53‐mediated cell fate selection, globally coupled DSB‐induced cells, coupled model consists, coupling mechanism, ATM variable, bystander signal, intercellular medium, sensitive DNA damage response, coupled p53 network oscillators, intercellular coupling, cell fate selection model, double‐strand break‐induced cells, DSBs, neighbour cells, oscillatory response, excitatory coupling, plausible coupling model     

Tracing enteric viruses in the European berry fruit supply chain

In recent years, numerous foodborne outbreaks due to consumption of berry fruit contaminated by human enteric viruses have been reported. This European multinational study investigated possible contamination routes by monitoring the entire food chain for a panel of human and animal enteric viruses.